Loading timer

Rail Data > Data > Codes > TOPS List > FGA-C
Main Details
TOPS Code/Class: FGA-C
Key Photo:
TOPS Category: ?This is my own (unofficial) means to categorise TOPS codes based on what they relate to and whether they are long (4 characters, i.e. including sub-codes) or short (3 characters) LW - Long Code, Wagons
TOPS GENKOC: ?The first character of a TOPS code is known as the GENKOC and indicates the general type of rolling stock (e.g. 1xx are DMUs). F - Flat Wagons
TOPS BRAKTY: ?The third character of many TOPS codes is the BRAKTY, indicating the type of braking equipment fitted (e.g. A indicates air brakes). A - Air brakes
Description: Lowliner Outer Wagon
Numbers: ?Numbers are only shown where the ranges were limited. Otherwise, refer to the listings section below. The letter r after the numbers indicates this is a range, with not all numbers in the sequence used. 150000-150001
Status: Defunct
Date On:
Origins: Reclassified (TOPS)
Date Off:
Destiny: Recoded to FZA
Sub-codes ?If this code had any sub-codes, they will be listed here.
None found
Designs/Diagrams ?Design codes and diagrams related to this code (and any sub-codes where relevant) are listed here.
1 designs/diagrams currently listed against this TOPS code/class (including any sub-codes).
FG001A FGA-C BR TOPS Wagon Design Code Lowliner Outer Vehicle Defunct
Batches ?Batches of numbers built or converted to this TOPS code are listed below. Note that only codes that were wholly to this code will appear, otherwise refer to the listings section for other numbers.
There are no batches recorded as being wholly to this TOPS code (including any sub-codes).
There are no listings of this type.
Photos - Internal
There are no photos of this type.
Photos - External
To be added
Note added Wed 26/05/2021 by Thomas Young
Category: Classification/Coding
Under TOPS Lowliner outer wagons 150000-150001 were initially coded as FGA-C to design code FG001A but were soon changed to FZA, further details not known.
Source: BR diagrams books on BMRG website

Related Information
To be added
Dimensions ?Dimensions are normally recorded against design/diagram numbers. They can be recorded against batches, lots or TOPS codes if the design/diagram is not available.
There are no dimensions recorded for this TOPS code.
Drawings ?Drawings are normally referenced to specific design/diagram numbers. They can be recorded against batches, lots or TOPS codes if the design/diagram is not available. If no drawings are listed here, try looking at related designs/diagrams (above).
There are no drawings referenced for this TOPS code.
Data History
Record added 01/01/2020 by Thomas Young
Record edited 1 time.
Time / DateEdited byChange
15:56 on Wed 26/05/2021Thomas YoungImproved details